Brook Wingman Converter for Xbox User Guide

Brook Wingman Converter for Xbox User Guide

Brook Wingman Converter for Xbox User Guide

Brook Wingman Converter for Xbox User Guide, Each Wingman XB can only connect to one device. Wingman XB supports most accessories compatible with original factory specifications. In order to expand the number of supported accessories, the firmware will be updated periodically.

LED display

Lighting Status
Blue LED
Permanently on
Connector and device are currently connected.
Blue LED
Flashing slowly
(Once every two seconds)
The wired device is notconnected

The wireless device is looking for a connection…

Blue LED
Fast flashing
Wireless mode is enabled. Searching for a device to pair…
Red LED
blinking
Turbo-Remap button pressed
Red LED
Permanently on
Entering turbo remapping settings

Connecting to a device

Step 1
Plug the Wingman XB into the USB port of your Xbox 360 / Xbox One console. A slow blinking blue LED indicates a successful connection to the console.
step. 2
Wired connection:
Connect a wired Xbox 360 / Xbox One / PS3 / PS4 / Switch Pro controller or gamepad to Wingman XB via USB port.
With the X360 Wireless Controller:
Simply connect the X360 Wireless Wireless Receiver to the Wingman XB via the USB port.
Using an Xbox One Wireless Controller / Xbox One Elite Series 2 Controller:
Connect your Xbox One (Bluetooth model) or Xbox One Elite Series 2 Wireless Controller to the Wingman XB and the controller is ready to use. When connected, hold down the LED buttons on both sides of the Wingman XB for 1 second to enter the wireless connection mode. Then press the pair button on the wireless controller to start pairing. Fast flashing Blue LED indicates that pairing is in progress.

Using the PS3 / PS4 / Switch Pro Wireless Controller:
After completing the connection according to the Wired Connections instructions, disconnect the USB cable and wake up the PS3 / PS4 / Switch Pro Wireless Controller from sleep mode.
step. 3
Verify that the two blue LEDs on the sides of the Wingman XB are solid. This means that the connection has been established.

Additional connection instructions

Step 1
Holding down the LED buttons on both sides of the Wingman XB for 1 second will activate the wireless pairing mode. Wingman XB will communicate with surrounding Bluetooth devices. Pairing mode will end when:
A. The connection is successfully paired with the wireless controller.
B. Connection pairing fails after 1 minute.
C. LED buttons are held for 1 second.
step. 2
Wireless connection entries between an Xbox One Wireless Controller (with Bluetooth functionality) / Xbox One Series 2 and Wingman XB will be deleted if
a wired connection is used.
If you are using a wireless connection, you will need to re-pair with the wireless connection.
step. 3
If using an Xbox One Elite Series 2 controller, turn off the settings pro. file controller to prevent interference with Wingman XB Turbo or Remap settings. Since the Xbox One Elite Series, 1 controller cannot turn off the professional version of the settings file, using an Xbox One Elite Series 1 controller may result in the remapping feature being applied.

Corresponding buttons

X81 X360 PS4 P53 switch PC
D-Pad (U/D/L/R)
Lx/Lu
Rx/Ry

A A X X B A
B B icon icon A B
X X Y X
Y Y x Y
LB LB LI LI L LB
R.B. R.B. R.I. R.I. R R.B.
LT LT L2 L2 ZL LT
RT RT R2 R2 ZR RT
LSB LSB L3 L3 L3 LSB
RSB RSB R3 R3 R3 RSB
MENU START MINING OPTIONS START MINING + START MINING
VIEW BACK SHARE CHOICE BACK
Xbox GuideKey Xbox Guide key PS key PS key home Xbox Guide key

Turbo function settings

The following instructions apply to the Xbox One controller.
For those using an Xbox 360 controller, see the appropriate list of buttons.

Turbo function settings
Buttons that can be configured as Turbo function buttons include A, B, X, Y, LB, RB, LT, RT, LSB, and RSB 10 (hereinafter FK).
Step 1 Enter Setting Mode:
Press VIEW + Xbox Guide, and RED LED Wingman XB will be permanently on.
Step 2. Selecting the FK button: (for example, setting A as turbo function) Hold VIEW, then press A
Step 3. End the setting mode:
Release all buttons, then press MENU to save the settings.
Step 4. Exit Setup Mode:
Press Xbox Guide, the BLUE LED of Wingman XB will be permanently on.

Cancel turbo function
Step 1 Enter setting mode:
Press VIEW + Xbox Guide, and RED LED Wingman XB will be permanently on.
Step 2. Remove all Turbo function buttons
Press VIEW + MENU
Step 3. Exit setup mode:
Press Xbox Guide, and Wingman XB BLUE LED will be permanently on.

Button remapping settings

The following instructions apply to the Xbox One controller.
For those using an Xbox 360 controller, see
the appropriate list of buttons.

Button remapping settings
Buttons that can be remapped include A, B, X, Y, LB, RB, LT, RT, LSB, and RSB 10 (hereinafter FK).
Step 1. Enter Setup Mode:
Press MENU + Xbox Guide, and the Wingman XB RED LED will be solid.
Step 2. Selecting the FK button: (for example, setting X as A + B)
Press X
Step 3. Selecting the custom button:
Hold VIEW, then press A + B.
Step 4. End the setting mode:
Release all buttons, then press MENU, to save your settings.
Step 5. Exit Setup Mode:
Press Xbox Guide and the Wingman XB’s BLUE LED will be solid.

Leave a Reply

Your email address will not be published.