Brook Wingman Converter for Xbox User Guide
Brook Wingman Converter for Xbox User Guide, Each Wingman XB can only connect to one device. Wingman XB supports most accessories compatible with original factory specifications. In order to expand the number of supported accessories, the firmware will be updated periodically.
LED display
| Lighting | Status |
| Blue LED Permanently on |
Connector and device are currently connected. |
| Blue LED Flashing slowly (Once every two seconds) |
The wired device is notconnected
The wireless device is looking for a connection… |
| Blue LED Fast flashing |
Wireless mode is enabled. Searching for a device to pair… |
| Red LED blinking |
Turbo-Remap button pressed |
| Red LED Permanently on |
Entering turbo remapping settings |
Connecting to a device
Step 1
Plug the Wingman XB into the USB port of your Xbox 360 / Xbox One console. A slow blinking blue LED indicates a successful connection to the console.
step. 2
Wired connection:
Connect a wired Xbox 360 / Xbox One / PS3 / PS4 / Switch Pro controller or gamepad to Wingman XB via USB port.
With the X360 Wireless Controller:
Simply connect the X360 Wireless Wireless Receiver to the Wingman XB via the USB port.
Using an Xbox One Wireless Controller / Xbox One Elite Series 2 Controller:
Connect your Xbox One (Bluetooth model) or Xbox One Elite Series 2 Wireless Controller to the Wingman XB and the controller is ready to use. When connected, hold down the LED buttons on both sides of the Wingman XB for 1 second to enter the wireless connection mode. Then press the pair button on the wireless controller to start pairing. Fast flashing Blue LED indicates that pairing is in progress.
Using the PS3 / PS4 / Switch Pro Wireless Controller:
After completing the connection according to the Wired Connections instructions, disconnect the USB cable and wake up the PS3 / PS4 / Switch Pro Wireless Controller from sleep mode.
step. 3
Verify that the two blue LEDs on the sides of the Wingman XB are solid. This means that the connection has been established.
Additional connection instructions
Step 1
Holding down the LED buttons on both sides of the Wingman XB for 1 second will activate the wireless pairing mode. Wingman XB will communicate with surrounding Bluetooth devices. Pairing mode will end when:
A. The connection is successfully paired with the wireless controller.
B. Connection pairing fails after 1 minute.
C. LED buttons are held for 1 second.
step. 2
Wireless connection entries between an Xbox One Wireless Controller (with Bluetooth functionality) / Xbox One Series 2 and Wingman XB will be deleted if
a wired connection is used.
If you are using a wireless connection, you will need to re-pair with the wireless connection.
step. 3
If using an Xbox One Elite Series 2 controller, turn off the settings pro. file controller to prevent interference with Wingman XB Turbo or Remap settings. Since the Xbox One Elite Series, 1 controller cannot turn off the professional version of the settings file, using an Xbox One Elite Series 1 controller may result in the remapping feature being applied.
| X81 | X360 | PS4 | P53 | switch | PC | |||||
| D-Pad (U/D/L/R) | ||||||||||
| Lx/Lu | ||||||||||
| Rx/Ry | ||||||||||
| A | A | X | X | B | A | |||||
| B | B |  |
|
A | B | |||||
| X | X |  |
|
Y | X | |||||
| Y | Y |  |
|
x | Y | |||||
| LB | LB | LI | LI | L | LB | |||||
| R.B. | R.B. | R.I. | R.I. | R | R.B. | |||||
| LT | LT | L2 | L2 | ZL | LT | |||||
| RT | RT | R2 | R2 | ZR | RT | |||||
| LSB | LSB | L3 | L3 | L3 | LSB | |||||
| RSB | RSB | R3 | R3 | R3 | RSB | |||||
| MENU | START MINING | OPTIONS | START MINING | + | START MINING | |||||
| VIEW | BACK | SHARE | CHOICE | – | BACK | |||||
| Xbox GuideKey | Xbox Guide key | PS key | PS key | home | Xbox Guide key | |||||
Turbo function settings
The following instructions apply to the Xbox One controller.
For those using an Xbox 360 controller, see the appropriate list of buttons.
Turbo function settings
Buttons that can be configured as Turbo function buttons include A, B, X, Y, LB, RB, LT, RT, LSB, and RSB 10 (hereinafter FK).
Step 1 Enter Setting Mode:
Press VIEW + Xbox Guide, and RED LED Wingman XB will be permanently on.
Step 2. Selecting the FK button: (for example, setting A as turbo function) Hold VIEW, then press A
Step 3. End the setting mode:
Release all buttons, then press MENU to save the settings.
Step 4. Exit Setup Mode:
Press Xbox Guide, the BLUE LED of Wingman XB will be permanently on.
Cancel turbo function
Step 1 Enter setting mode:
Press VIEW + Xbox Guide, and RED LED Wingman XB will be permanently on.
Step 2. Remove all Turbo function buttons
Press VIEW + MENU
Step 3. Exit setup mode:
Press Xbox Guide, and Wingman XB BLUE LED will be permanently on.
The following instructions apply to the Xbox One controller.
For those using an Xbox 360 controller, see
the appropriate list of buttons.
Button remapping settings
Buttons that can be remapped include A, B, X, Y, LB, RB, LT, RT, LSB, and RSB 10 (hereinafter FK).
Step 1. Enter Setup Mode:
Press MENU + Xbox Guide, and the Wingman XB RED LED will be solid.
Step 2. Selecting the FK button: (for example, setting X as A + B)
Press X
Step 3. Selecting the custom button:
Hold VIEW, then press A + B.
Step 4. End the setting mode:
Release all buttons, then press MENU, to save your settings.
Step 5. Exit Setup Mode:
Press Xbox Guide and the Wingman XB’s BLUE LED will be solid.
